C613-50100-01 REV C Command Reference for x930 Series 2677
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
DEBUGGING ATMF PACKET
show debugging atmf packet
Overview This command shows details of AMF Packet debug command settings.
Syntax
show debugging atmf packet
Mode User Exec and Global Configuration
Example To display the AMF packet debugging status, use the command:
node_1# show debug atmf packet
Figure 54-19: Sample output from the show debugging atmf packet command.
Related
Commands
debug atmf
debug atmf packet
ATMF packet debugging is on
=== ATMF Packet Debugging Parameters===
Node Name: x908
Port name: port1.1.1
Limit: 500 packets
Direction: TX
Info Level: Level 2
Packet Type Bitmap:
2. Crosslink Hello BPDU pkt with downlink domain info
3. Crosslink Hello BPDU pkt with uplink info
4. Down and up link Hello BPDU pkts
6. Stack hello unicast pkts
8. DBE request
9. DBE update
10. DBE bitmap update
To Next Page
Loading...
Need help?
General
