Allied Telesis AlliedWare Plus - Show Mls Qos Interface

C613-50100-01 REV C Command Reference for x930 Series 2031
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
SHOW
MLS QOS INTERFACE
show mls qos interface
Overview Displays the current settings for the interface. This includes its default CoS and
queue, scheduling used for each queue, and any policies/maps that are attached.
Syntax
show mls qos interface [<port>]
Mode User Exec and Privileged Exec
Example To display current CoS and queue settings for interface port1.0.1, use the
command:
awplus# show mls qos interface port1.0.1
Output Figure 41-4: Example output from the show mls qos interface command
Parameter Description
<port> Switch port.
Interface: port1.0.1

Number of egress queues: 8

Egress Queue: 0
Status: Enabled
Scheduler: Strict Priority

Egress Queue: 1
Status: Enabled
Scheduler: Strict Priority

Egress Queue: 2
Status: Enabled
Scheduler: Strict Priority