C613-50100-01 REV C Command Reference for x930 Series 1024
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
SHOW
IP OSPF BORDER-ROUTERS
show ip ospf border-routers
Overview Use this command to display the ABRs and ASBRs for all OSPF instances. Include
the process ID parameter with this command to view data about specified
instances.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip ospf border-routers
show ip ospf <process-id> border-routers
Mode User Exec and Privileged Exec
Output Figure 26-3: Example output from the show ip ospf border-routers command
Parameter Description
<process-id> <0-65535> The ID of the router process for which information will
be displayed.
OSPF process 1 internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.15.0.1 [10] via 10.10.0.1, vlan2, ASBR, Area 0.0.0.0
i 172.16.10.1 [10] via 10.10.11.50, vlan3, ABR, ASBR, Area
0.0.0.0
To Next Page
Loading...
