41
C613-50100-01 REV C Command Reference for x930 Series 1989
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QoS Commands
Introduction
Overview This chapter provides an alphabetical reference for Quality of Service commands.
QoS uses ACLs. For more information about ACLs, see the ACL Feature Overview
and Configuration Guide.
Command List •“class” on page 1991
•“class-map” on page 1992
•“clear mls qos interface policer-counters” on page 1993
•“default-action” on page 1994
•“description (QoS policy-map)” on page 1995
•“egress-rate-limit” on page 1996
•“match access-group” on page 1997
•“match cos” on page 1999
•“match dscp” on page 2000
•“match eth-format protocol” on page 2001
•“match inner-cos” on page 2004
•“match inner-vlan” on page 2005
•“match ip-precedence” on page 2006
•“match mac-type” on page 2007
•“match tcp-flags” on page 2008
•“match vlan” on page 2009
•“mls qos cos” on page 2010
•“mls qos enable” on page 2011
•“mls qos map cos-queue to” on page 2012