C613-50100-01 REV C Command Reference for x930 Series 198
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
USER ACCESS COMMANDS
TELNET
telnet
Overview Use this command to open a telnet session to a remote device.
Syntax
telnet {<hostname>|[ip] <ipv4-addr>|[ipv6] <ipv6-addr>}
[<port>]
Syntax (VRF lite) telnet [vrf <vrf-name>] {<hostname>|[ip] <ipv4-addr>|[ipv6]
<ipv6-addr>} [<port>]
Mode User Exec and Privileged Exec
Examples To connect to TCP port 2602 on the device at 10.2.2.2, use the command:
awplus# telnet 10.2.2.2 2602
To connect to the telnet server host.example, use the command:
awplus# telnet host.example
To connect to the telnet server host.example on TCP port 100, use the
command:
awplus# telnet host.example 100
Example (VRF
lite)
To open a telnet session to a remote host 192.168.0.1 associated with VRF
instance red, use the command:
awplus# telnet vrf red ip 192.168.0.1
Parameter Description
vrf Apply this command to a VRF instance.
<vrf-name> The name of the VRF instance.
<hostname> The host name of the remote system.
ip Keyword used to specify the IPv4 address or host name of a remote
system.
<ipv4-addr> An IPv4 address of the remote system.
ipv6 Keyword used to specify the IPv6 address of a remote system
<ipv6-addr> Placeholder for an IPv6 address in the format x:x::x:x, for
example, 2001:db8::8a2e:7334
<port> Specify a TCP port number (well known ports are in the range 1-
1023, registered ports are 1024-49151, and private ports are 49152-
65535).
To Next Page
Loading...
Need help?
General
