Allied Telesis AlliedWare Plus - Show License

C613-50100-01 REV C Command Reference for x930 Series 207
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FEATURE LICENSING COMMANDS
SHOW
LICENSE
show license
Overview This command displays information about a specific software feature license, or all
enabled software feature licenses on the device.
Syntax
show license [feature] [<label>|index <index-number>]
Mode User Exec and Privileged Exec
Usage In a stacked configuration, this command will display licenses applied to a stack
master only.
In a stacked configuration, use the show license member command instead if you
need to display license information for a specific stack member or all stack
members.
Examples To display full information about all enabled licenses, use the command:
awplus# show license
To display full information about the licenses with index number 1, use the
command:
awplus# show license index 1
Output Figure 4-2: Example output from show license
Parameter Description
feature Only display license information for any applied feature licenses.
<label> The license name to show information about. This can be used
instead of the index number to identify a specific license.
index
<index-number>
The index number of the license to show information about. This
can be used instead of the license name to identify a specific
license.
awplus#show license
Board region: Global
Software Licenses
------------------------------------------------------------------------
Index : 1
License name : Base License
Customer name : Base License
Quantity of licenses : 1
Type of license : Full
License issue date : 12-Jul-2014
License expiry date : N/A
Features included : IPv6Basic, LAG-FULL, MLDSnoop, RADIUS-100, VCS,
VRRP