C613-50100-01 REV C Command Reference for x930 Series 206
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FEATURE LICENSING COMMANDS
LICENSE
If you add a feature license you will be prompted at the console that the feature
needs to restart. For example, if the feature license contains a license for the EPSR
protocol, then that protocol will restart, but you do not need to manually restart
the whole device for the new license to take effect. Restarting of individual
protocols in this manner could result in the loss of network traffic. Only install
licenses in scheduled maintenance periods for devices in a live environment.
Examples To activate the license called “IPv6” that has the key
12345678ABCDE123456789ABCDE, use the command:
awplus# license IPv6 12345678ABCDE123456789ABCDE
To deactivate the license called “IPv6”, use the command:
awplus# no license ipv6
Output Figure 4-1: Example of a license command entry to remove a feature license:
Related
Commands
show license
show license member
awplus#no license IPv6
Stack member 1: Removal of "IPv6" will disable the following features:
IPv6
INFO: Uninstalling license key will disable the affected modules immediately.
Would you like to continue? (y/n): y
Stack member 1 removed 1 license
1 license removed.
To Next Page
Loading...
Need help?
General
