C613-50100-01 REV C Command Reference for x930 Series 2661
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF LINKS GUEST
Output Figure 54-14: Example of output from show atmf links guest detail
Detailed Guest Link Information:
Interface : port1.0.1
Class Name : -
Model Type : other
Discovery Method : Dynamic
IP Address : 192.168.1.2
State : Getting ID
MAC address : 0013.1a1e.4589
Interface : port1.0.2
Class Name : aastra-phone
Model Type : other
Discovery Method : Dynamic
IP Address : 192.168.1.3
State : Full
MAC address : 0008.5d10.7635
Device Type : Aastra IP Phone
Interface : port1.0.4
Class Name : panasonic-camera
Model Type : other
Discovery Method : Dynamic
IP Address : 192.168.1.5
State : Getting ID
MAC address : 0800.239e.f1fe
Table 54-1: Parameters shown in the output of show atmf links guest
Parameter Description
Interface The port on the parent node that connects to the guest.
Class Name The name of the ATMF guest-class that has been assigned
to the guest node by the atmf guest-class command.
Model-Type The model type of the guest node, as entered by the
modeltype command. Can be one of the following:
• alliedware
•aw+
•tq
•other
Discovery Method The discovery method as applied by the discovery
command. This can be either dynamic or static.
IP Address The IP address of the guest node.
State
MAC Address The MAC address of the guest node.
To Next Page
Loading...
Need help?
General
