Allied Telesis AlliedWare Plus - Chapter 61: RMON Commands; Introduction; RMON Commands

61
C613-50100-01 REV C Command Reference for x930 Series 2937
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RMON Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Remote Monitoring (RMON).
For an introduction to RMON and an RMON configuration example, see the RMON
Feature Overview and Configuration Guide.
RMON is disabled by default in AlliedWare Plus™. No RMON alarms or events are
configured.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“rmon alarm” on page 2938
•“rmon collection history” on page 2940
•“rmon collection stats” on page 2941
•“rmon event” on page 2942
•“show rmon alarm” on page 2943
•“show rmon event” on page 2944
•“show rmon history” on page 2946
•“show rmon statistics” on page 2948