C613-50100-01 REV C Command Reference for x930 Series 2434
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VIRTUAL CHASSIS STACKING (VCSTACK™) COMMANDS
SHOW
COUNTER STACK
ID conflict Number of times that stack-ID conflicts.
Master conflict Number of times that stack master conflict occurs.
Master failover Number of times that stack master fails.
Master elected Number of times that stack master is elected.
Master
discovered
Number of times that stack master is discovered.
SW autoupgrades Number of times that the software in the stack members are
auto upgraded.
Stack port
Link up Number of times that this unit's physical stack link has come
up.
Link down Number of times that this unit's physical stack link has come
down.
Nbr re-init Number of times that the neighbor is detected as having
reinitialized.
Nbr
incompatible
Number of times that the neighbor is detected as
incompatible.
Nbr 2way comms Number of times that the neighbor is in two way
communication status.
Nbr full comms Number of times that the neighbor is in full communication
status.
Topology message counters
Total Total number of topology messages.
Hellos Number of hello messages.
Topology DB Number of topology database messages.
Topology update Number of topology database update messages.
Link event Number of link event messages.
Reinitialise Number of reinitialize messages.
1-hop transport Number of 1-hop transport messages.
Layer-2
transport
Number of layer 2 transport messages.
Table 1: Parameters in the output of the show counter stack command (cont.)
Parameters Description
To Next Page
Loading...
