Allied Telesis AlliedWare Plus - Page 680

C613-50100-01 REV C Command Reference for x930 Series 680
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
POWER OVER ETHERNET COMMANDS
SHOW
POWER-INLINE
Related
Commands
show power-inline counters
show power-inline interface
Class The class of the connected PD, if power is being supplied to
the PD.
Max (mW) The power in milliwatts (mW) allocated for the PoE port.
Additionally, note the following as displayed per PoE port:
• [U] if the power limit for a port was user configured (with
the power-inline max command).
• [L] if the power limit for a port was supplied by LLDP.
• [C] if the power limit for a port was supplied by the PD
class.
Table 1: Parameters in the show power-inline command output (cont.)
Parameter Description