C613-50100-01 REV C Command Reference for x930 Series 2387
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP SNOOPING COMMANDS
SHOW
ARP SECURITY INTERFACE
Related
Commands
arp security violation
show arp security
show arp security statistics
show log
snmp-server enable trap
Table 4: Parameters in the output from the show arp security interface
command
Parameter Description
Action The action the switch takes when it detects an ARP security violation
on the port.
Port The port. Parentheses indicate that ports are configured for
provisioning.
LG, Log Generate a log message
TR, Trap Generate an SNMP notification (trap).
LD, Link
down
Shut down the link.
To Next Page
Loading...
