C613-50100-01 REV C Command Reference for x930 Series 2694
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
•“ip dhcp-relay max-message-length” on page 2715
•“ip dhcp-relay server-address” on page 2717
•“lease” on page 2719
•“network (DHCP)” on page 2721
•“next-server” on page 2722
•“option” on page 2723
•“probe enable” on page 2725
•“probe packets” on page 2726
•“probe timeout” on page 2727
•“probe type” on page 2728
•“range” on page 2729
•“route” on page 2730
•“service dhcp-relay” on page 2731
•“service dhcp-server” on page 2732
•“show counter dhcp-client” on page 2733
•“show counter dhcp-relay” on page 2734
•“show counter dhcp-server” on page 2738
•“show dhcp lease” on page 2740
•“show ip dhcp binding” on page 2742
•“show ip dhcp pool” on page 2744
•“show ip dhcp-relay” on page 2748
•“show ip dhcp server statistics” on page 2750
•“show ip dhcp server summary” on page 2752
•“subnet-mask” on page 2753
To Next Page
Loading...
Need help?
General
