C613-50100-01 REV C Command Reference for x930 Series 2674
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF VIRTUAL-LINKS
Table 61: Sample output from the show atmf virtual-links macaddr command.
ATMF Link Remote Information:
ATMF Management Bridge Information:
Bridge: br-atmfmgmt
port no mac addr is local? ageing timer
1 00:00:cd:27:c2:07 yes 0.00
Table 62: Parameter definitions from the show atmf virtual-links command output
Parameter Definition
vlink1 The tunnel named vlink1, equivalent to an L2TP tunnel.
Local ID The local ID of the virtual link. This matches the vlink<number>
State The operational state of the vlink (either Up or Down). This state is always
displayed once a vlink has been created.
mac addr AMF virtual links terminate on an internal soft bridge. The “show atmf
virtual-links macaddress” command displays MAC Address information.
is local ? Indicates whether the MAC displayed is for a local or a remote device.
ageing timer Indicates the current aging state for each MAC address.
To Next Page
Loading...
Need help?
General
