Allied Telesis AlliedWare Plus - Page 1469

C613-50100-01 REV C Command Reference for x930 Series 1469
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ROUTE MAP COMMANDS
SET
METRIC
Examples To use entry 3 of the route map called rmap1 to give matching routes a metric of
600, use the commands:
awplus# configure terminal
awplus(config)# route-map rmap1 permit 3
awplus(config-route-map)# set metric 600
To use entry 3 of the route map called rmap1 to increase the metric of matching
routes by 2, use the commands:
awplus# configure terminal
awplus(config)# route-map rmap1 permit 3
awplus(config-route-map)# set metric +2
Related
Commands
match metric
route-map
show route-map