C613-50100-01 REV C Command Reference for x930 Series 2418
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OPENFLOW COMMANDS
SHOW
OPENFLOW RULES
Related
Commands
show openflow flows
show openflow coverage
Table 50-4: Parameters in the output from show openflow rules
Parameter Description
duration The duration of the flow entry in seconds
n_packets The number of packets that match the flow entry
n_bytes The number of bytes that match the flow entry
priority The priority of the flow entry
in_port The OpenFlow port number on which the packets are
received
dl_src The source address
dl_dst The destination address
actions A set of actions applied to a packet. The actions are: “drop”,
“goto_table”, “pop_vlan”, or “push_vlan”
table_id The table ID of the flow entry
To Next Page
Loading...
