C613-50100-01 REV C Command Reference for x930 Series 2554
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
ATMF
BACKUP NOW
Example 3 To initiate from AMF_master_1 an immediate backup of all AMF member nodes,
use the following command:
AMF_Master_1# amf backup now
Example 4 To initiate an immediate backup of the node with the host-name “office_annex”
and store the configuration on both masters, use the following process:
From the AMF_master_1, set the working-set to comprise only of the automatic
group, master nodes.
AMF_Master_1# atmf working-set group master
This command returns the following display:
Backup the AMF member with the host name, office_annex on both the master
nodes as defined by the working set.
AMF_Master[2]# atmf backup now office_annex
Note that the [2] shown in the command prompt indicates a 2 node working-set.
Related
Commands
atmf backup
atmf backup stop
hostname
show atmf backup
============================
AMF_Master_1, AMF_Master_2
===============================
Working set join
To Next Page
Loading...
Need help?
General
