C613-50100-01 REV C Command Reference for x930 Series 2978
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SECURE SHELL (SSH) COMMANDS
SHOW
SSH SERVER
Related
Commands
show ssh
show ssh client
Idle Timeout Time (in seconds) that the SSH server will wait to receive data
from the SSH client. The server disconnects if this timer limit
is reached. If set at 0, the idle timer remains off.
Maximum
Startups
The maximum number of concurrent connections that are
waiting authentication. The default is 10.
Debug Whether debugging is active on the server.
Table 8: Parameters in the output of the show ssh server command (cont.)
Parameter Description
To Next Page
Loading...
