C613-50100-01 REV C Command Reference for x930 Series 352
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
LOG
CONSOLE (FILTER)
Examples To create a filter to send all messages containing the text “Bridging initialization”
to console instances where the log console command has been entered, use the
following commands:
awplus# configure terminal
awplus(config)# log console msgtext "Bridging initialization"
To remove a filter that sends all messages generated by EPSR that have a severity
of notices or higher to consoles, use the following commands:
awplus# configure terminal
awplus(config)# no log console level notices program epsr
To remove a default filter that includes sending critical, alert and emergency
level messages to the console, use the following commands:
awplus# configure terminal
awplus(config)# no log console level critical
Related
Commands
default log console
log console
log console exclude
show log config