Allied Telesis AlliedWare Plus - Page 1065

C613-50100-01 REV C Command Reference for x930 Series 1065
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPFV3 FOR IPV6 COMMANDS
AREA
ENCRYPTION IPSEC SPI ESP
To enable ESP encryption with a 48 hexadecimal character 3DES key and a 32
hexadecimal character MD5 authentication for OPSPF area 1, use the commands:
awplus# configure terminal
awplus(config)# router ipv6 ospf
awplus(config-router)# area 1 encryption ipsec spi 1000 esp 3des
1234567890ABCDEF1234567890ABCDEF1234567890ABCDEF md5
1234567890ABCDEF1234567890ABCDEF
To enable ESP encryption with a 32 hexadecimal character AES-CBC key, and a 40
hexadecimal character SHA-1 authentication key for OPSPF area 1, use the
commands:
awplus# configure terminal
awplus(config)# router ipv6 ospf
awplus(config-router)# area 1 encryption ipsec spi 1000 esp
aes-cbc 1234567890ABCDEF1234567890ABCDEF sha1
1234567890ABCDEF1234567890ABCDEF12345678
To disable ESP encryption for OPSPF area 1, use the commands:
awplus# configure terminal
awplus(config)# router ipv6 ospf
awplus(config-router)# no area 1 encryption ipsec spi 1000
Related
Commands
area authentication ipsec spi
area virtual-link authentication ipsec spi
area virtual-link encryption ipsec spi
ipv6 ospf authentication spi
ipv6 ospf encryption spi esp
show ipv6 ospf