C613-50100-01 REV C Command Reference for x930 Series 1135
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPFV3 FOR IPV6 COMMANDS
SHOW
IPV6 OSPF INTERFACE
Figure 27-13: Example output from the show ipv6 ospf interface vlan3
command
Related
Commands
ipv6 ospf authentication spi
ipv6 ospf encryption spi esp
awplus#show ipv6 ospf interface vlan3
vlan3 is up, line protocol is up
Interface ID 203
IPv6 Prefixes
fe80::200:cdff:fe24:daae/64 (Link-Local Address)
2003:1111::2/64
OSPFv3 Process (P1), Area 0.0.0.0, Instance ID 0
Router ID 0.0.1.1, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 0.0.1.1
Interface Address fe80::200:cdff:fe24:daae
No backup designated router on this link
Timer interval configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in 00:00:02
Neighbor Count is 0, Adjacent neighbor count is 0
To Next Page
Loading...
Need help?
General
