C613-50100-01 REV C Command Reference for x930 Series 1244
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
BGP AND BGP4+ COMMANDS
MATCH
COMMUNITY (ROUTE MAP)
Example To add entry 3 to the route map called myroute, which will process update
messages if they contain the community values that are included in mylist, use
the commands:
awplus# configure terminal
awplus(config)# route-map myroute permit 3
awplus(config-route-map)# match community mylist
Related
Commands
route-map (Route Map)
set community (Route Map)
To Next Page
Loading...
