C613-50100-01 REV C Command Reference for x930 Series 127
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
COPY
(FILENAME)
To copy the file config.cfg into the current directory from a remote file server, and
rename it to configtest.cfg, use the command:
awplus# copy fserver:/config.cfg configtest.cfg
To copy the file test.txt from the top level of Flash on stack member 2 to the current
directory in the stack master, use the command:
awplus# copy awplus-2/flash:/test.txt test.txt
Note that you must specify either the NVS or Flash filesystem on the (backup) stack
member (flash: in this example).
Related
Commands
copy zmodem
edit (filename)
show file systems
To Next Page
Loading...
