C613-50100-01 REV C Command Reference for x930 Series 1438
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ROUTE MAP COMMANDS
MATCH
COMMUNITY
Example To add entry 3 to the route map called myroute, which will process update
messages if they contain the community values that are included in mylist, use
the commands:
awplus# configure terminal
awplus(config)# route-map myroute permit 3
awplus(config-route-map)# match community mylist
Related
Commands
ip community-list
route-map
set comm-list delete
set community
show route-map