C613-50100-01 REV C Command Reference for x930 Series 150
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
SHOW
BOOT
Related
Commands
autoboot enable
boot config-file backup
boot system backup
show autoboot
Backup boot config The configuration file to use during the next boot cycle if
the main configuration file cannot be loaded.
Autoboot status The status of the Autoboot feature; either enabled or
disabled.
Table 1: Parameters in the output of the show boot command (cont.)
Parameter Description
To Next Page
Loading...
