C613-50100-01 REV C Command Reference for x930 Series 1516
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VRF LITE COMMANDS
NEIGHBOR
PASSWORD
This example removes the password set for the neighbor 10.10.10.1:
awplus# configure terminal
awplus(config)# router bgp 10
awplus(config-router)# no neighbor 10.10.10.1 password
This example specifies the encryption type and the password (manager) for the
neighbor peer group named group1:
awplus# configure terminal
awplus(config)# router bgp 10
awplus(config-router)# neighbor group1 peer-group
awplus(config-router)# neighbor 10.10.10.1 remote-as 10
awplus(config-router)# neighbor 10.10.10.1 peer-group group1
awplus(config-router)# neighbor group1 password manager
This example removes the password set for the neighbor peer group named
group1:
awplus# configure terminal
awplus(config)# router bgp 10
awplus(config-router)# no neighbor group1 password
Example (VRF
lite)
This example specifies the password (manager) for the neighbor peer group
named group1 for an IPv4 address-family, VRF name red, and router bgp 10:
awplus# configure terminal
awplus(config)# router bgp 10
awplus(config-router)# address-family ipv4 vrf red
awplus(config-router-af)# neighbor 10.10.10.1 password manager
Example (VRF
lite)
This example removes the password (manager) for the neighbor peer group
named group1 for an IPv4 address-family, VRF name red, and router bgp 10:
awplus# configure terminal
awplus(config)# router bgp 10
awplus(config-router)# address-family ipv4 vrf red
awplus(config-router-af)# no neighbor 10.10.10.1 password
manager
To Next Page
Loading...
Need help?
General
