C613-50100-01 REV C Command Reference for x930 Series 153
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
SHOW
FILE SYSTEMS
Related
Commands
edit
edit (filename)
show file
Prefixes The prefixes used when entering commands to access the
filesystems; one of:
flash
system
usb
tftp
scp
sftp
http.
S/V/D The memory type: static, virtual, dynamic.
Lcl / Ntwk Whether the memory is located locally or via a network
connection.
Avail Whether the memory is accessible: Y (yes), N (no), - (not applicable)
Table 2: Parameters in the output of the show file systems command (cont.)
Parameter Description
To Next Page
Loading...
