C613-50100-01 REV C Command Reference for x930 Series 1605
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IGMP AND IGMP SNOOPING COMMANDS
IP
IGMP QUERY-HOLDTIME
To reset the IGMP query holdtime to the default (500 ms) for vlan10, use the
following commands:
awplus# configure terminal
awplus(config)# interface vlan10
awplus(config-if)# no ip igmp query-holdtime
Related
Commands
ip igmp query-interval
ip igmp snooping tcn query solicit
show ip igmp interface
show running-config
To Next Page
Loading...
