C613-50100-01 REV C Command Reference for x930 Series 170
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
USER ACCESS COMMANDS
ENABLE
PASSWORD
password. It is not required to use the service password-encryption command for
this method. The output in the configuration file will show only the encrypted
string, and not the text string.
awplus# configure terminal
awplus(config)# enable password 8 fU7zHzuutY2SA
awplus(config)# end
This results in the following show output:
Related
Commands
enable (Privileged Exec mode)
enable secret
service password-encryption
privilege level
show privilege
username
show running-config
awplus#show run
Current configuration:
hostname awplus
enable password 8 fU7zHzuutY2SA
!
interface lo
To Next Page
Loading...
Need help?
General
