C613-50100-01 REV C Command Reference for x930 Series 1710
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
MULTICAST COMMANDS
SHOW
IPV6 MROUTE
The following is a sample output of this command displaying the IPv6 multicast
routing count table for a single static IPv6 Multicast route:
Figure 33-9: Example output from the show ipv6 mroute count command
The following is a sample output of this command displaying the IPv6 multicast
routing summary table for a single static IPv6 Multicast route:
Figure 33-10: Example output from the show ipv6 mroute summary command
awplus#show ipv6 mroute count
IPv6 Multicast Statistics
Total 1 routes using 152 bytes memory
Route limit/Route threshold: 1024/1024
Total NOCACHE/WRONGmif/WHOLEPKT recv from fwd: 6/0/0
Total NOCACHE/WRONGmif/WHOLEPKT sent to clients: 6/0/0
Immediate/Timed stat updates sent to clients: 0/0
Reg ACK recv/Reg NACK recv/Reg pkt sent: 0/0/0
Next stats poll: 00:01:14
Forwarding Counts: Pkt count/Byte count, Other Counts: Wrong If
pkts
Fwd msg counts: WRONGmif/WHOLEPKT recv
Client msg counts: WRONGmif/WHOLEPKT/Imm Stat/Timed Stat sent
Reg pkt counts: Reg ACK recv/Reg NACK recv/Reg pkt sent
(2001::2, ff08::1), Forwarding: 0/0, Other: 0
Fwd msg: 0/0, Client msg: 0/0/0/0, Reg: 0/0/0
awplus#show ipv6 mroute summary
IPv6 Multicast Routing Table
Flags: I - Immediate Stat, T - Timed Stat, F - Forwarder
installed
Timers: Uptime/Stat Expiry
Interface State: Interface
(2001::2, ff08::1), 03:20:28/-, IMI, Flags: F
To Next Page
Loading...
Need help?
General
