C613-50100-01 REV C Command Reference for x930 Series 1719
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PIM-SM COMMANDS
DEBUG
PIM SPARSE-MODE TIMER
Default By default, all debugging is disabled.
Mode Privileged Exec and Global Configuration
Examples To enable debugging for the PIM-SM Bootstrap Router bootstrap timer, use the
commands:
awplus(config)# debug pim sparse-mode timer bsr bst
To enable debugging for the PIM-SM Hello: neighbor liveness timer, use the
command:
awplus(config)# debug pim sparse-mode timer hello ht
To enable debugging for the PIM-SM Joinprune expiry timer, use the command:
awplus# debug pim sparse-mode timer joinprune et
To disable debugging for the PIM-SM Register timer, use the command:
awplus# no debug pim sparse-mode timer register
Related
Commands
show debugging pim sparse-mode
ot Enable or disable debugging for the JoinPrune timer: Upstream Override
Timer.
register Enable or disable debugging for the Register timers.
rst Enable or disable debugging for the Register timer: Register Stop Timer.
Parameter Description
To Next Page
Loading...
Need help?
General
