C613-50100-01 REV C Command Reference for x930 Series 173
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
USER ACCESS COMMANDS
ENABLE
SECRET
is not required to use the service password-encryption command for this method.
The output in the configuration file will show only the encrypted string, and not
the text string:
awplus# configure terminal
awplus(config)# enable secret 8 fU7zHzuutY2SA
awplus(config)# end
This results in the following show output:
Related
Commands
enable (Privileged Exec mode)
enable secret
service password-encryption
privilege level
show privilege
username
show running-config
awplus#show run
Current configuration:
hostname awplus
enable password 8 fU7zHzuutY2SA
!
interface lo
To Next Page
Loading...
Need help?
General
