C613-50100-01 REV C Command Reference for x930 Series 177
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
USER ACCESS COMMANDS
FLOWCONTROL
HARDWARE (ASYN/CONSOLE)
Examples To enable hardware flow control on terminal console line asyn0, use the
commands:
awplus# configure terminal
awplus(config)# line console 0
awplus(config-line)# flowcontrol hardware
To disable hardware flow control on terminal console line asyn0, use the
commands:
awplus# configure terminal
awplus(config)# line console 0
awplus(config-line)# no flowcontrol hardware
Related
Commands
clear line console
show running-config
speed (asyn)
To Next Page
Loading...
