C613-50100-01 REV C Command Reference for x930 Series 180
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
USER ACCESS COMMANDS
LINE
To enter Line Configuration mode to configure the console (asyn 0) port terminal
line, use the commands:
awplus# configure terminal
awplus(config)# line console 0
awplus(config-line)#
Related
Commands
accounting login
clear line console
clear line vty
flowcontrol hardware (asyn/console)
length (asyn)
login authentication
privilege level
speed (asyn)
To Next Page
Loading...
