C613-50100-01 REV C Command Reference for x930 Series 1859
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV4 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
References For descriptions of ACLs, and further information about rules when applying them,
see the ACL Feature Overview and Configuration Guide.
For more information on link aggregation see the following references:
•the Link Aggregation Feature Overview and Configuration Guide.
• Link Aggregation Commands
Command List •“access-group” on page 1860
•“access-list (hardware IP numbered)” on page 1862
•“access-list (hardware MAC numbered)” on page 1871
•“access-list hardware (named)” on page 1874
•“(access-list hardware ICMP filter)” on page 1876
•“(access-list hardware IP protocol filter)” on page 1879
•“(access-list hardware MAC filter)” on page 1884
•“(access-list hardware TCP UDP filter)” on page 1887
•“commit (IPv4)” on page 1890
•“show access-list (IPv4 Hardware ACLs)” on page 1891
•“show interface access-group” on page 1893
access-group Global Configuration awplus(config)#
access-list (hardware IP numbered) Global Configuration awplus(config)#
access-list (hardware MAC numbered) Global Configuration awplus(config)#
access-list hardware (named) Global Configuration awplus(config)#
access-group Interface Configuration awplus(config-if)#
(access-list hardware ICMP filter) IPv4 Hardware ACL
Configuration
awplus(config-ip-hw-acl)#
(access-list hardware IP protocol filter) IPv4 Hardware ACL
Configuration
awplus(config-ip-hw-acl)#
(access-list hardware MAC filter) IPv4 Hardware ACL
Configuration
awplus(config-ip-hw-acl)#
(access-list hardware TCP UDP filter) IPv4 Hardware ACL
Configuration
awplus(config-ip-hw-acl)#
commit (IPv4) IPv4 Hardware ACL
Configuration
awplus(config-ip-hw-acl)#
Table 37-1: IPv4 Hardware Access List Commands and Prompts (cont.)
Command Name Command Mode Prompt
To Next Page
Loading...
Need help?
General
