Allied Telesis AlliedWare Plus User Manual

C613-50100-01 REV C Command Reference for x930 Series 1930
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV4 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
DOS
Examples To configure smurf DoS detection on port1.0.1, and shutdown the interface if
an attack is detected, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# dos smurf broadcast 192.168.1.0 action
shutdown
To configure land DoS detection on port1.0.1, and shutdown the interface if an
attack is detected, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# dos land action shutdown
To configure ipoptions DoS detection on port1.0.1, and shutdown the
interface if an attack is detected, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# dos ipoptions action shutdown
To configure ping-of-death DoS detection on port1.0.1, and shutdown the
interface if an attack is detected, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# dos ping-of-death action shutdown
To configure synflood DoS detection on port1.0.1, and shutdown the
interface if an attack is detected, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# dos synflood action shutdown
To configure teardrop DoS detection on port1.0.1, and shutdown the
interface if an attack is detected, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1
awplus(config-if)# dos teardrop action shutdown
Related
Commands
show dos interface

Allied Telesis AlliedWare Plus Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus
Category	Switch
Language	English