C613-50100-01 REV C Command Reference for x930 Series 1935
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV4 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
ACCESS-LIST (IPV4 SOFTWARE ACLS)
Note the following error message is displayed if you attempt to show an undefined
access-list:
awplus# show access-list 2
Related
Commands
access-list standard (named)
access-list (standard numbered)
access-list (extended numbered)
Standard IP access-list 20
deny 192.168.10.0, wildcard bits 0.0.0.255
deny 192.168.12.0, wildcard bits 0.0.0.255
% Can't find access-list 2
To Next Page
Loading...
Need help?
General
