C613-50100-01 REV C Command Reference for x930 Series 1943
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV6 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
Command List •“commit (IPv6)” on page 1944
•“ipv6 access-list (named)” on page 1945
•“(ipv6 access-list named ICMP filter)” on page 1947
•“(ipv6 access-list named IPv6 filter)” on page 1950
•“(ipv6 access-list named protocol filter)” on page 1953
•“(ipv6 access-list named TCP UDP filter)” on page 1957
•“ipv6 traffic-filter” on page 1961
•“show ipv6 access-list (IPv6 Hardware ACLs)” on page 1963
Table 39-1: IPv6 Hardware Access List Commands and Prompts
Command Name Command Mode Prompt
show ipv6 access-list (IPv6 Hardware
ACLs)
Privileged Exec awplus#
ipv6 access-list (named) Global Configuration awplus(config)#
ipv6 traffic-filter Interface Configuration awplus(config-if)#
commit (IPv6) IPv6 Hardware ACL
Configuration
awplus(config-ipv6-hw-acl)#
(ipv6 access-list named IPv6 filter) IPv6 Hardware ACL
Configuration
awplus(config-ipv6-hw-acl)#
(ipv6 access-list named ICMP filter) IPv6 Hardware ACL
Configuration
awplus(config-ipv6-hw-acl)#
(ipv6 access-list named protocol
filter)
IPv6 Hardware ACL
Configuration
awplus(config-ipv6-hw-acl)#
(ipv6 access-list named TCP UDP
filter)
IPv6 Hardware ACL
Configuration
awplus(config-ipv6-hw-acl)#
To Next Page
Loading...
Need help?
General
