C613-50100-01 REV C Command Reference for x930 Series 2014
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
MLS
QOS MAP PREMARK-DSCP TO
Example To set the entry for DSCP 1 to use a new DSCP of 2, a new CoS of 3, and a new
bandwidth class of yellow, use the command:
awplus# configure terminal
awplus(config)# mls qos map premark-dscp 1 to new-dscp 2 new-cos
3 new-bandwidth-class yellow
Example To reset the entry for DSCP 1 use the command:
awplus# configure terminal
awplus(config)# no mls qos map premark-dscp 1
Related
Commands
show mls qos maps premark-dscp
trust dscp
To Next Page
Loading...
Need help?
General
