C613-50100-01 REV C Command Reference for x930 Series 2023
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
QOS COMMANDS
REMARK
-MAP
To remark the policed green traffic to a new DSCP of 2, use the commands:
awplus# configure terminal
awplus(config)# policy-map pmap1
awplus(config-pmap)# class cmap1
awplus(config-pmap-c)# remark-map bandwidth-class green to
new-dscp 2
To reset the DSCP for all bandwidth classes, use the commands:
awplus# configure terminal
awplus(config)# policy-map pmap1
awplus(config-pmap)# class cmap1
awplus(config-pmap-c)# no remark-map to new-dscp
Related
Commands
police single-rate action
police twin-rate action
To Next Page
Loading...
Need help?
General
