C613-50100-01 REV C Command Reference for x930 Series 2065
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
802.1X COMMANDS
DOT
1X MAX-AUTH-FAIL
To configure the maximum number of login attempts for a supplicant on
authentication profile 'student' to a single (1) login attempt, use the commands:
awplus# configure terminal
awplus(config)# auth profile student
awplus(config-auth-profile)# dot1x max-auth-fail 1
To configure the maximum number of login attempts for a supplicant on
authentication profile 'student' to the default number of three (3) login attempts,
use the commands:
awplus# configure terminal
awplus(config)# auth profile student
awplus(config-auth-profile)# no dot1x max-auth-fail
Validation
Commands
show running-config
show dot1x interface
Related
Commands
auth auth-fail vlan
auth profile (Global Configuration)
dot1x max-reauth-req
To Next Page
Loading...
