C613-50100-01 REV C Command Reference for x930 Series 2394
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING ACL
To display detailed DHCP snooping ACL information for port 1.0.4, use the
command:
awplus# show ip dhcp snooping acl detail interface port1.0.4
Table 12: Example output from the show ip dhcp snooping acl hardware command
awplus#show ip dhcp snooping acl hardware
DHCP Snooping Based Filters in Hardware:
Interface Access-list(/ClassMap) Source IP Source MAC
-----------------------------------------------------------------------------
port1.0.2 dhcpsn1 10.10.10.10 aaaa.bbbb.cccc
port1.0.2 dhcpsn1 20.20.20.20 0000.aaaa.bbbb
port1.0.2 dhcpsn1 0.0.0.0 0000.0000.0000
port1.0.2 dhcpsn1 0.0.0.0 0000.0000.0000
port1.0.2 dhcpsn1 0.0.0.0 0000.0000.0000
port1.0.2 dhcpsn1 0.0.0.0 0000.0000.0000
port1.0.3 dhcpsn2/cmap1 30.30.30.30 aaaa.bbbb.dddd
port1.0.3 dhcpsn2/cmap1 40.40.40.40 0000.aaaa.cccc
port1.0.3 dhcpsn2/cmap1 50.50.50.50 0000.aaaa.dddd
port1.0.3 dhcpsn2/cmap1 60.60.60.60 0000.aaaa.eeee
port1.0.3 dhcpsn2/cmap1 0.0.0.0 0000.0000.0000
port1.0.3 dhcpsn2/cmap1 0.0.0.0 0000.0000.0000
port1.0.3 dhcpsn2/cmap1 0.0.0.0 0000.0000.0000
port1.0.3 dhcpsn2/cmap1 0.0.0.0 0000.0000.0000
port1.0.4 dhcpsn3/cmap2 70.70.70.70
port1.0.4 dhcpsn3/cmap2 80.80.80.80
port1.0.4 dhcpsn2/cmap1 70.70.70.70
port1.0.4 dhcpsn2/cmap1 80.80.80.80
port1.0.4 dhcpsn1 70.70.70.70
port1.0.4 dhcpsn1 80.80.80.80
To Next Page
Loading...
Need help?
General
