C613-50100-01 REV C Command Reference for x930 Series 2403
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING STATISTICS
Table 19: Example output from the show ip dhcp snooping statistics detail command
awplus# show ip dhcp snooping statistics detail
DHCP Snooping Statistics:
Interface ........................................ port1.0.1, All counters 0
Interface ........................................ port1.0.2, All counters 0
Interface ........................................ port1.0.3, All counters 0
Interface ........................................ port1.0.4
In Packets ..................................... 50
In BOOTP Requests ............................ 25
In BOOTP Replies ............................. 25
In Discards .................................... 1
Invalid BOOTP Information .................... 0
Invalid DHCP ACK ............................. 0
Invalid DHCP Release or Decline .............. 0
Invalid IP/UDP Header ........................ 0
Max Bindings Exceeded ........................ 1
Option 82 Insert Error ....................... 0
Option 82 Received Invalid ................... 0
Option 82 Received On Untrusted Port ......... 0
Option 82 Transmit On Untrusted Port ......... 0
Reply Received On Untrusted Port ............. 0
Source MAC/CHADDR Mismatch ................... 0
Static Entry Already Exists .................. 0
Interface ........................................ port1.0.5, All counters 0
Interface ........................................ port1.0.6, All counters 0
Table 20: Parameters in the output from the show ip dhcp snooping statistics
command
Parameter Description
Interface The interface name.
In Packets The total number of incoming packets that are processed
by DHCP Snooping.
In BOOTP Requests The total number of incoming BOOTP Requests.
In BOOTP Replies The total number of incoming BOOTP Replies.
In Discards The total number of incoming packets that have been
discarded.
Invalid BOOTP
Information
Packet contained invalid BOOTP information, such as an
invalid BOOTP.OPCode.
Invalid DHCP ACK A DHCP ACK message was discarded, for reasons such as
missing Server Option or Lease Option.
To Next Page
Loading...
Need help?
General
