C613-50100-01 REV C Command Reference for x930 Series 252
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
HOSTNAME
Example To set the system name to HQ-Sales, use the command:
awplus# configure terminal
awplus(config)# hostname HQ-Sales
This changes the prompt to:
HQ-Sales(config)#
To revert to the default hostname awplus, use the command:
HQ-Sales(config)# no hostname
This changes the prompt to:
awplus(config)#
NOTE: When AMF is configured, running the no hostname command will apply a
hostname that is based on the MAC address of the device node, for example,
node_0000_5e00_5301.
Related
Commands
show system
To Next Page
Loading...
Need help?
General
