C613-50100-01 REV C Command Reference for x930 Series 2534
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
•“atmf backup bandwidth” on page 2546
•“atmf backup delete” on page 2547
•“atmf backup enable” on page 2548
•“atmf backup guests delete” on page 2549
•“atmf backup guests enable” on page 2550
•“atmf backup guests now” on page 2551
•“atmf backup guests synchronize” on page 2552
•“atmf backup now” on page 2553
•“atmf backup redundancy enable” on page 2555
•“atmf backup server” on page 2556
•“atmf backup stop” on page 2558
•“atmf backup synchronize” on page 2559
•“atmf cleanup” on page 2560
•“atmf controller” on page 2561
•“atmf distribute firmware” on page 2562
•“atmf domain vlan” on page 2564
•“atmf enable” on page 2566
•“atmf group (membership)” on page 2567
•“atmf guest-class” on page 2569
•“atmf log-verbose” on page 2571
•“atmf management subnet” on page 2572
•“atmf management vlan” on page 2574
•“atmf master” on page 2575
•“atmf mtu” on page 2576
•“atmf network-name” on page 2577
•“atmf provision” on page 2578
•“atmf provision node clone” on page 2579
•“atmf provision node configure boot config” on page 2581
•“atmf provision node configure boot system” on page 2582
•“atmf provision node create” on page 2583
•“atmf provision node delete” on page 2585
•“atmf provision node license-cert” on page 2587
•“atmf provision node locate
” on page 2589
•“atmf reboot-rolling” on page 2590
•“atmf recover” on page 2594
To Next Page
Loading...
Need help?
General
