C613-50100-01 REV C Command Reference for x930 Series 2584
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
ATMF
PROVISION NODE CREATE
Figure 54-3: Sample output from the show atmf backup command
For instructions on how to configure on a provisioned node, see the AMF Feature
Overview and Configuration Guide.
Related
commands
atmf provision node clone
device1#show atmf backup
Scheduled Backup ...... Enabled
Schedule ............ 1 per day starting at 03:00
Next Backup Time .... 01 Oct 2016 03:00
Backup Bandwidth ...... Unlimited
Backup Media .......... USB (Total 7446.0MB, Free 7315.2MB)
Server Config .........
Synchronization ..... Unsynchronized
Last Run .......... -
1 .................. Unconfigured
2 .................. Unconfigured
Current Action ........ Idle
Started ............. -
Current Node ........ -
---------------------------------------------------------------
Node Name Date Time In ATMF On Media Status
---------------------------------------------------------------
device2 - - No Yes Prov
device1 30 Sep 2016 00:05:49 No Yes Good
To Next Page
Loading...
Need help?
General
