C613-50100-01 REV C Command Reference for x930 Series 2638
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF BACKUP AREA
Related
Commands
atmf backup area-masters enable
show atmf area
show atmf area nodes-detail
switchport atmf-arealink remote-area
Table 56: Output from the show atmf backup area command
controller-1#show atmf backup area
Scheduled Backup ...... Enabled
Schedule ............ 12 per day starting at 14:30
Next Backup Time .... 15 Oct 2016 04:30
Backup Bandwidth ...... Unlimited
Backup Media .......... FILE SERVER 1 (Total 128886.5MB, Free 26234.2MB)
Server Config .........
* 1 .................. Configured (Mounted, Active)
Host .............. 10.37.74.1
Username .......... root
Path .............. /tftpboot/backups_from_controller-1
Port .............. -
2 .................. Configured (Unmounted)
Host .............. 10.37.142.1
Username .......... root
Path .............. -
Port .............. -
Current Action ........ Idle
Started ............. -
Current Node ........ -
Backup Redundancy ..... Enabled
Local media ......... USB (Total 7604.0MB, Free 7544.0MB)
State ............... Active
Area Name Node Name Id Date Time Status
----------------------------------------------------------------------------
Wellington camry 1 14 Oct 2016 02:30:22 Good
Canterbury corona 1 14 Oct 2016 02:30:23 Good
Canterbury Avensis 1 14 Oct 2016 02:30:22 Good
Auckland RAV4 1 14 Oct 2016 02:30:23 Good
Southland MR2 1 14 Oct 2016 02:30:24 Good
To Next Page
Loading...
Need help?
General
