C613-50100-01 REV C Command Reference for x930 Series 2702
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
IP
ADDRESS DHCP
To stop the interface vlan10 from using DHCP to obtain its IP address, use the
commands:
awplus# configure terminal
awplus(config)# interface vlan10
awplus(config-if)# no ip address dhcp
Related
Commands
ip address (IP Addressing and Protocol)
show ip interface
show running-config
To Next Page
Loading...
