C613-50100-01 REV C Command Reference for x930 Series 2706
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
IP
DHCP OPTION
Examples To define a user-defined ASCII string option as option 66, without a name, use the
command:
awplus# configure terminal
awplus(config)# ip dhcp option 66 ascii
To define a user-defined hexadecimal string option as option 46, with the name
“tcpip-node-type”, use the commands:
awplus# configure terminal
awplus(config)# ip dhcp option 46 name tcpip-node-type hex
To define a user-defined IP address option as option 175, with the name
special-address, use the commands:
awplus# configure terminal
awplus(config)# ip dhcp option 175 name special-address ip
To remove the specific user-defined option with the option number 12, use the
commands:
awplus# configure terminal
awplus(config)# no ip dhcp option 12
To remove the specific user-defined option with the option name
perform-router-discovery, use the commands:
awplus# configure terminal
awplus(config)# no ip dhcp option perform-router-discovery
To remove all user-defined option definitions, use the commands:
awplus# configure terminal
awplus(config)# no ip dhcp option
Related
Commands
default-router
dns-server
domain-name
option
service dhcp-server
show ip dhcp server summary
subnet-mask
To Next Page
Loading...
Need help?
General
