C613-50100-01 REV C Command Reference for x930 Series 2773
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP FOR IPV6 (DHCPV6) COMMANDS
IPV
6 ADDRESS DHCP
To stop to the PPP interface ppp0 from using DHCPv6 to obtain its IPv6 address,
use the commands:
awplus# configure terminal
awplus(config)# interface ppp0
awplus(config-if)# no ipv6 address dhcp
Related
Commands
ipv6 address
Validation
Commands
show running-config
To Next Page
Loading...
